依據台灣法規【用戶用電設備裝置規則】(原名稱為:屋內線路裝置規則 或 電工法規)
第 一 章 總則
第 六 節 安培容量
第 16 條
絕緣電線之安培容量應符合左列規定:
一、常用絕緣電線按其絕緣物容許溫度如表16-1所示。
二、絕緣電線按磁珠磁夾板配線,其安培容量如表16-2所示。
三、絕緣電線按導線管槽配線時,其安培容量如表16-3至表16-6所示。
四、絕緣電線按PVC管配線時,其安培容量如表16-7所示。
五、絕緣電線裝於周溫高於35℃處所,其安培容量應乘以表16-8所列修正係數。
此軟體可快速查詢表16-6及表16-7。
App 進階完整版:https://goo.gl/Nw5cJY
Microsoft 市集 (簡易版):https://reurl.cc/lG4zj
Windows 簡易版:https://reurl.cc/zvy9e
According to Taiwan regulations [user electrical equipment installation rules] (formerly known as: indoor wiring equipment rules or electrical regulations)
Chapter 1 General
Section 6 Ampere Capacity
Article 16
The ampacity of insulated wires shall comply with the following provisions:
1. The allowable temperature of commonly used insulated wires according to their insulation is shown in Table 16-1.
Second the insulated wire is wired according to the magnetic bead cleat and its amperage capacity is shown in Table 16-2.
3. When the insulated wire is wired according to the conduit the ampere capacity is shown in Table 16-3 to Table 16-6.
4. When the insulated wire is wired according to PVC pipe its amperage capacity is shown in Table 16-7.
5. The insulated wire shall be installed at a place where the ambient temperature is higher than 35 °C and its amperage capacity shall be multiplied by the correction factor listed in Table 16-8.
This software can quickly query Table 16-6 and Table 16-7.
App advanced full version: https://goo.gl/Nw5cJY
Microsoft Market (Simplified Edition): https://reurl.cc/lG4zj
Windows Lite: https://reurl.cc/zvy9e
第 一 章 總則
第 六 節 安培容量
第 16 條
絕緣電線之安培容量應符合左列規定:
一、常用絕緣電線按其絕緣物容許溫度如表16-1所示。
二、絕緣電線按磁珠磁夾板配線,其安培容量如表16-2所示。
三、絕緣電線按導線管槽配線時,其安培容量如表16-3至表16-6所示。
四、絕緣電線按PVC管配線時,其安培容量如表16-7所示。
五、絕緣電線裝於周溫高於35℃處所,其安培容量應乘以表16-8所列修正係數。
此軟體可快速查詢表16-6及表16-7。
App 進階完整版:https://goo.gl/Nw5cJY
Microsoft 市集 (簡易版):https://reurl.cc/lG4zj
Windows 簡易版:https://reurl.cc/zvy9e
According to Taiwan regulations [user electrical equipment installation rules] (formerly known as: indoor wiring equipment rules or electrical regulations)
Chapter 1 General
Section 6 Ampere Capacity
Article 16
The ampacity of insulated wires shall comply with the following provisions:
1. The allowable temperature of commonly used insulated wires according to their insulation is shown in Table 16-1.
Second the insulated wire is wired according to the magnetic bead cleat and its amperage capacity is shown in Table 16-2.
3. When the insulated wire is wired according to the conduit the ampere capacity is shown in Table 16-3 to Table 16-6.
4. When the insulated wire is wired according to PVC pipe its amperage capacity is shown in Table 16-7.
5. The insulated wire shall be installed at a place where the ambient temperature is higher than 35 °C and its amperage capacity shall be multiplied by the correction factor listed in Table 16-8.
This software can quickly query Table 16-6 and Table 16-7.
App advanced full version: https://goo.gl/Nw5cJY
Microsoft Market (Simplified Edition): https://reurl.cc/lG4zj
Windows Lite: https://reurl.cc/zvy9e
Show More >