Use Connect Anduino to make two way communication with any micro-controller using Bluetooth or serial port/USB communication with different options available. Use the below mentioned features using both type of communication.

Connect and Control your device easy and simple...

• Serial Port/USB Communication: Your phone should be compatible of OTG support and deliver enough power.
Set the Serial port in the settings select you baud rate parity data bit and stop bit.

• Bluetooth Communication: Connect to the last Bluetooth device automatically or set the Bluetooth device from the app option menu with auto retry feature.

Features:
1. Set the button name and value and view the sent and received data on the 'DISPLAY DATA' tab.
• There are different escape sequence available that can be select or simply write an escape sequence at starting or end of data every data sent by 'DISPLAY DATA' tab.
• You can also save the data to a file (Data logging). Click on text view for options.(under construction)

2. Control your RGB led or led intensity. Range in-between 0 to 1024.

3. Control the movement using JOYSTICK:
->Angle
->Power
->X-axis
->Y-axis

4. Send sensor value from phone:
->Accelerometer with and without gravity
->Gyroscope with and without drift compensation
->Rotation vector+scalar
->Magnetic field
->Gravity of each axis
->Orientation (azimuth pitch roll)
Note: The values are sent with a delay of 500ms.

5. Use Graph tab to plot the graph with maximum 2000 data points.
Future updates will improve and include many other features for plotting graph including saving the graph values and its snapshot.
Note: Each separate data end with "n".

6. GPS tab to send the latitude longitude altitude speed accuracy bearing UTC time. You can also view the number of satellite connected and their information's.

7. RTC tab for getting date and time from you mobile device with custom refresh interval.
Note: Current sending format HH:MM:SS:AA:DD:MM:YY.

8. GSM tab for sending and reading the message directly from your android device no additional module required instead use phone as a GSM module.

9. RFID tab for reading tags and cards and send its data to connected micro-controller.
Note: Your device should have the supported NFC hardware. It can also read metro cards and other supports tag like Mifare NDEF RFID FeliCa ISO 14443 etc.

10. Save some specific values for reference in the SAVE-VIEW DATA tab by just clicking save.
Note: Each separate data end with "n".

WiFi and IoT feature coming soon......

Customise the number of tabs on home screen.

For more information and code see HELP section.

This is not enough in the future updates you will be able to customise app save your data connect using WiFi etc. So that you can connect and control every thing right from your android smart phone.

Suggest us about the feature that you would love to have in our future updates by providing us with the Feedback.

App is under developing stage and getting better day by day.

Developer: ASHISH KUMAR

INVOOTECH
Innovation and Technology